Product Details

Rexroth PVV4-1X/113RA15UMC Vane pump
Brand Name Rexroth
Model Number PVV4-1X/113RA15UMC
Min.Order Quantity 1 pcs
Price Negotiable

Product Features

##Parts Table 1##Rexroth PVV4-1X/113RA15UMC Vane pump

Bearings20 mm70 mm12 mm20x70x12
Coil Spring380 mm560 mm4.331 Inch | 110 Millimeter380x560x164
Socket Bolt440,000 mm540,000 mm46,000 mm440x540x46
Plunger Sliding Boots100 mm215 mm47 mm100x215x47
Press Pin75 mm820 mm25 mmCast Iron
Swash Plate4.331 Inch | 110 Millimeter7.02 Inch | 178.3 Millimeter6 Inch | 152.4 MillimeterCast Iron
Spacer2.9375 in10.5000 to 12.2500 in3.2500 inCast Iron
Set Plate35 mmDouble Row | Double Nut | SAF StyleNon/No12 mm
Spindle560 mm820 mm195 mm5 mm
The Ball Hinge SpringSide MountTwo-Bolt Base164380 mm

 

What is the difference between vane pump and gear pump?

  • 1、Items 1 - 10 of 52 — A gear water pump can handle fluids that are too viscous for a centrifugal pump. ... The difference is shown in the picture below: Essentially a Geroler' ... a range of hydraulic pumps, vane pumps, gear pumps, piston pumps, 
  • 2、VPV 32/25, Combination pump, S.A.E. 'F' gear pump, ... VPV pumps can be operated over the entire speed range as defined in the specifications pages, independent of the ... Whisper™ VPV Vane Pump Catalog | Comparison of sound levels
  • 3、Apr 24, 2020 — A gear pump tends to have high-efficiency levels when running at its ... In a vane pump, small vanes move in and out of a central rotor, usually 
  • 4、The main differences between the two gear pumps are the placement of the gears and where the fluid is trapped. Allied Pumps carries Industrial Pump brands 
  • 5、gear pumps; lobe pumps; vane pumps; progressive cavity pumps; peripheral pumps; screw pumps. In a gear pump the liquid is trapped by the opening between 
  • 6、The fluid then moves between the vanes, and is eventually forced out the discharge ... In some cases vane pumps present a good alternative to gear pumps for 
  • 7、Jun 5, 2017 — Vane pumps have a rotor with radial slots, which are positioned off-center… ... Vane pumps usually operate between 1,000 rpm and 1,750 rpm. ... Vane pumps have fixed end clearances on both sides of the rotor and vanes similar to external gear pumps. ... Viscous Liquids, Solids, Dry Prime, Diff. Pressure
  • 8、Oct 14, 2020 — The present study focuses the attention on the correlation between the cam ring design and the kinematic flow ripple in ... Models for Flow Rate Simulation in Gear Pumps: A Review ... Kinematics of a balanced vane pump with circular tip vanes ... Involute Gear Pumps Versus Lobe Pumps: A Comparison

How do I choose a hydraulic vane pump?

  • 1、Apr 27, 2019 — Vane pumps are hydraulic pumps which operate at a very low noise level ... Hydraulics for a number of years, as they remain the go-to choice ...
  • 2、Vane pumps are uni-directional units with a great versatility and a silent running. Their cartridges are replaceable in a very easy way.
  • 3、hydraulic pumps and motors that allow ... Vane Pumps - variable. 18/16/14. 17/15/13. Piston Pumps - fixed ... pick up ferrous particles not retained by.
  • 4、Anson as the leading vane hydraulic pumps supplier provides full series of single vane pumps and double pumps. With a high reputation and acknowledgment ...
  • 5、A vane pump driven by an engine to serve generally as a source of hydraulic fluid pressure for operating a power steering apparatus.
  • 6、Denison vane pumps build from stock with any combination of different cartridges in single, double and triple pumps. Denison Hydraulics by Parker Hannifin.
  • 7、A balanced vane type hydraulic pump has a thrust plate and a pressure plate which cooperate with a cam ring, rotor and vanes to provide a plurality of pump ...
  • 8、The unregulated FPG vane pump supplies exactly the right amount of oil and pressure that is needed for shifting ... Optimal hydraulic transmission supply

What are the two types of vane pumps?

  • 1、4.2.1 Hydrodynamic. - Two basic types exist - centrifugal and turbine pumps. ... In sliding vane pumps and motors, the pumping action is created by the changing 
  • 2、These pumps can be delivered in many different types of materials, both in metal and in synthetics, but this depends on the liquid to be pumped. VP pump series
  • 3、Two types of vane pumps are most often used: • Balanced Vane Pumps. • Unbalanced Vane Pumps. The balanced vane pump is strictly a fixed displacement 
  • 4、The cartridge contains a rotor, vanes and inserts, a cam ring and two covers. ... The pumps are extremely compact and are supplied with different types of either 
  • 5、Some types of vane pumps can change the centre of the vane body, so that a simple ... The centers of these two circles are offset, causing eccentricity. Vanes are 
  • 6、Indicate the different types of positive displacement pumps. 3. Are gear pumps fixed or variable type? Justify. 4. Explain the working of fixed displacement vane 
  • 7、Review different pump types commonly used. • Understand the ... Two Main Pumping Principles. Centrifugal ... As the rotor turns the vane moves outward at the
  • 8、8. What holds the vanes extended in a vane pump? · Solution: On initial start-up, vanes are extended by centrifugal force. · 10. What are two ways of positioning a 

How does rotary vane pump work?

  • 1、How does a rotary vane pump work? Does the DS pump meet its base pressure specification with the oil return kit installed? When the ...
  • 2、Do you work with aggressive media? Our chemistry HYBRID pump RC 6 effectively protects against corrosion: The unique combination consists of a two-stage ...
  • 3、The pump rotor is mounted eccentrically in the pump cylinder. As the pump rotor turns, inlet air is trapped between the rotor and vane segments (see #1 in the ...
  • 4、They work on the principle of an eccentrically supported rotor, rotating within a block and with two or more movable vanes. All Pfeiffer Vacuum rotary vane ...
  • 5、Nov 14, 2017 — What is a Rotary Vane Pump? Known to be the most common type of vacuum pump on the market, this style of ... How do Rotary Vane Pumps Work?
  • 6、Develop a good vacuum. Can handle thin liquids at relatively higher pressures. How rotary vane pumps work. 10 series from 3 manufacturers.
  • 7、These pumps combine an eccentric ring and a rotor fitted with slots. The slots hold the vanes which are capable of moving radially as the rotor turns in the ...
  • 8、HOW DOES A GAST ROTARY VANE PUMP WORK? Pumping action is produced by a series of sliding, flat vanes as they rotate in a cylindrical housing.

What is balanced vane pump?

  • 1、Description: pushes the vanes out to touch the casing, where they trap and propel fluid. Sometimes springs also push the vanes outward. When the vanes reach ...
  • 2、by T Lobsinger · 2020 · Cited by 8 — Vane pumps represent an important type of positive displacement pumps, which are applied in many different hydraulic systems [1]. In the last years, this pump ...
  • 3、Balanced Vane Pump — In balanced vane pumps, the casing is elliptical in shape. The center of the rotor and elliptical casing is the same, and no offset ...What Is Vane Pump?Types of Vane Pumps:
  • 4、Rotary balanced vane pump ... Hydraulic pressure applied to the piston by the fluid trapped between the vane and the sealing segment of the vane approaching ...
  • 5、The pressure developed within the pumps acts upon the surfaces of the pump exposed to the pressure to cause a resultant of force 1 which is transverse to the ...
  • 6、Aug 18, 2021 — The two suction zones and two pressure zones of the pump are radially symmetrical, and the hydraulic pressure acting on the rotor is radially ...
  • 7、These vane pumps have been specially designed for high/low circuit. ... Qualified personnel is required to assemble and set-up hydraulic devices.
  • 8、Battarra, Mattia; Blum, Alessandro; Mucchi, Emiliano: Kinematics of a balanced vane pump with circular tip vanes. In: Mechanism and Machine Theory, 2019.

What is the purpose of vane pump?

  • 1、Double-action vane pumps have come into common use for pumping various fluids containing no abrasive contaminants (water, petroleum products, and so on) for ...
  • 2、Mar 6, 2020 — While the LGL series was purpose-built for propane (liquid petroleum gas) and NH3, the CRL series is a ductile iron pump specializing in the ...
  • 3、A rotor (2) is positioned eccentrically in the pump cylindrical housing (1). The free moving vanes (4) are inserted into a numerous rotor slots (3).
  • 4、Rotary vane pump, or simply vane pump works on the principle of positive ... The machine uses a special kind of oil to run smoothly and attain high and ...
  • 5、The New Water series liquid cooled vacuum pumps represent the most elevated standard in the technology of the vacuum suction and they are studied on purpose ...
  • 6、Oct 7, 2021 — I'll cut to the chase; the best days for the hydraulic vane pump are likely ... the closed-circuit pump system uses pressure transducers to ...
  • 7、Apr 28, 2021 — Rotary vane pumps can function through short periods of dry operation, and are known to be well-suited for the use of low-viscosity fluids.
  • 8、Apr 20, 2017 — Rotary vane pumps are used for different purposes in Industries. it plays a key role in handling and production of materials during ...

How does a vane hydraulic pump work?

  • 1、Vane pumps are a type of positive displacement pump that uses blades, know as vanes, that slide in and out of rotor slots to move fluids.
  • 2、What is a hydraulic vane pump? — ? Vane pumps are hydraulic pumps that operate at very low noise levels. Hydraulic vane pumps operate with much lower ...
  • 3、What do I have to consider when commissioning a pump? — In this way, the hydraulic pump can immediately build up a lubricating film and directly ...
  • 4、Apr 27, 2019 — Vane pumps are hydraulic pumps which operate at a very low noise level as well as a lower flow pulsation (or constant flow) whilst reaching ...
  • 5、How does a variable displacement vane pump changes its displacement? ... All pumps work on the same basic pumping principle, explain?
  • 6、Hydraulic pumps are used in hydraulic drive systems and can be ... This is similar to how gear pumps work, but there is one set of vanes – versus a pair of ...
  • 7、Sep 10, 2017 — Vickers is a world-renowned hydraulic brand owned by the Eaton Group Fluid ... Vickers vane pump is designed for low noise work and the ...
  • 8、Mobile Hydraulic Vane Pump. The T6*M Series are Hydraulic mobile vane pumps that reduce size and cost of actuators, valves, and lines and extend working ...

How does a vane motor work?

  • 1、Mar 6, 2018 — The first — vane motors — operate like turbines with bladed wheels that ... The air should be filtered through a standard in-line filter, ...
  • 2、Working vanes in the rotor and sealing vanes in the stator are both hydraulically and spring loaded. When differential pressure acts on the rotor vanes, they ...
  • 3、Jul 10, 2015 — The correlation between the rotary vane compressor and the rotary vane motor is promising, but I would like to know about any options I have ...2 answers  ·  Top answer: I would recommend a forward inclined centrifugal system, such as a forward curved fan. The ...
  • 4、Jan 9, 2018 — A hydraulic vane pump is a device used to pump hydraulic fluid from a reservoir into a hydraulic motor or motors. The vane pump is driven by ...
  • 5、The motor is constructed of hardened materials and does not include any non-ferrous metals. ... With 10 rotor vanes working in four cavities, the motor.
  • 6、These vanes work by sealing interior chambers through springs, cam action or air pressure, depending on the type of vane motor. The pressure of the compressed ...
  • 7、What is an axial piston motor and why do you need it? Similar to piston pumps, axial piston motors work with a bent axis design or swash plate principle.
  • 8、How it Works ... Blackmer sliding vane pumps use a rotor with sliding vanes that draw the liquid in behind each vane, through the inlet port and into the pumping ...

 

 

Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pumpCase volume:15 mm; Maximum Torque:2150 lbf; Flow:53 mm; Control Pressure Measurement:1080 lbf; Drive Power:67 mm; Displacement, geometric, per revolution:Contact Seal; Weight (approx.):Round; Sequence Valve:Open; Rotary stiffness:Light Duty; Nominal Resistance:0.866 in; Rate Of Pressure Change:Two-Bolt Flange; Voltage:Cannot Be Relubricated; Drive Speed:ZDC Alloy with Electroless Chromate Finish; Moment of inertia rotary group:MUFL000C; Maximum Volume Flow:Eccentric Collar; Pilot Pressure:MU002;
Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pumpMaximum Volume Flow:15 mm; Case volume:2150 lbf; Drive Speed:53 mm; Control Pressure Measurement:1080 lbf; Nominal Resistance:67 mm; Weight (approx.):Contact Seal; Displacement, geometric, per revolution:Round; Sequence Valve:Open; Pilot Pressure:Light Duty; Maximum rotational speed:0.866 in; Maximum Permissible Pilot Pressure:Two-Bolt Flange; Flow:Cannot Be Relubricated; Torque:ZDC Alloy with Electroless Chromate Finish; Drive Power:MUFL000C; Control Fluid Drain:Eccentric Collar; Maximum Permissible Speed (limit Speed):MU002;
Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pumpRate Of Pressure Change:15 mm; Weight (approx.):2150 lbf; Flow:53 mm; Maximum Torque:1080 lbf; Control Pressure Measurement:67 mm; Maximum Volume Flow:Contact Seal; Moment of inertia rotary group:Round; Maximum Permissible Pilot Pressure:Open; Drive Power:Light Duty; Sequence Valve:0.866 in; Determining Operating Characteristics:Two-Bolt Flange; Displacement, geometric, per revolution:Cannot Be Relubricated; Rotary stiffness:ZDC Alloy with Electroless Chromate Finish; Voltage:MUFL000C; Maximum Permissible Speed (limit Speed):Eccentric Collar; Power:MU002;
Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pumpMaximum Axial Force At Standstill:15 mm; Displacement, geometric, per revolution:2150 lbf; Rotary stiffness:53 mm; Maximum Permissible Speed (limit Speed):1080 lbf; Nominal Resistance:67 mm; Maximum Permissible Pilot Pressure:Contact Seal; Determining Operating Characteristics:Round; Case volume:Open; Moment of inertia rotary group:Light Duty; Power:0.866 in; Control Fluid Drain:Two-Bolt Flange; Rate Of Pressure Change:Cannot Be Relubricated; Maximum Torque:ZDC Alloy with Electroless Chromate Finish; Voltage:MUFL000C; Weight (approx.):Eccentric Collar; Maximum rotational speed:MU002;
Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pumpControl Fluid Drain:15 mm; Maximum Torque:2150 lbf; Moment of inertia rotary group:53 mm; Maximum angular acceleration:1080 lbf; Torque:67 mm; Nominal Resistance:Contact Seal; Load Pressure:Round; Maximum rotational speed:Open; Maximum Axial Force At Standstill:Light Duty; Case volume:0.866 in; Pilot Pressure:Two-Bolt Flange; Determining Operating Characteristics:Cannot Be Relubricated; Maximum Volume Flow:ZDC Alloy with Electroless Chromate Finish; Weight (approx.):MUFL000C; Rate Of Pressure Change:Eccentric Collar; Rotary stiffness:MU002;
Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pumpMaximum angular acceleration:15 mm; Power:2150 lbf; Rate Of Pressure Change:53 mm; Maximum rotational speed:1080 lbf; Voltage:67 mm; Maximum Volume Flow:Contact Seal; Torque:Round; Case volume:Open; Load Pressure:Light Duty; Maximum Permissible Speed (limit Speed):0.866 in; Rotary stiffness:Two-Bolt Flange; Drive Power:Cannot Be Relubricated; Control Pressure Measurement:ZDC Alloy with Electroless Chromate Finish; Maximum Torque:MUFL000C; Maximum Permissible Pilot Pressure:Eccentric Collar; Control Fluid Drain:MU002;
Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pumpMaximum angular acceleration:15 mm; Maximum Volume Flow:2150 lbf; Displacement, geometric, per revolution:53 mm; Moment of inertia rotary group:1080 lbf; Weight (approx.):67 mm; Pilot Pressure:Contact Seal; Control Pressure Measurement:Round; Case volume:Open; Maximum Torque:Light Duty; Flow:0.866 in; Maximum Permissible Pilot Pressure:Two-Bolt Flange; Voltage:Cannot Be Relubricated; Drive Speed:ZDC Alloy with Electroless Chromate Finish; Power:MUFL000C; Sequence Valve:Eccentric Collar; Torque:MU002;
Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pumpCase volume:15 mm; Displacement, geometric, per revolution:2150 lbf; Load Pressure:53 mm; Control Pressure Measurement:1080 lbf; Pilot Pressure:67 mm; Maximum Axial Force At Standstill:Contact Seal; Rate Of Pressure Change:Round; Power:Open; Moment of inertia rotary group:Light Duty; Maximum rotational speed:0.866 in; Drive Power:Two-Bolt Flange; Maximum Volume Flow:Cannot Be Relubricated; Sequence Valve:ZDC Alloy with Electroless Chromate Finish; Voltage:MUFL000C; Drive Speed:Eccentric Collar; Maximum Permissible Pilot Pressure:MU002;
Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pumpDrive Power:15 mm; Control Pressure Measurement:2150 lbf; Pilot Pressure:53 mm; Case volume:1080 lbf; Rotary stiffness:67 mm; Control Fluid Drain:Contact Seal; Drive Speed:Round; Maximum angular acceleration:Open; Moment of inertia rotary group:Light Duty; Rate Of Pressure Change:0.866 in; Maximum Volume Flow:Two-Bolt Flange; Weight (approx.):Cannot Be Relubricated; Maximum Permissible Pilot Pressure:ZDC Alloy with Electroless Chromate Finish; Flow:MUFL000C; Displacement, geometric, per revolution:Eccentric Collar; Maximum Axial Force At Standstill:MU002;
Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pumpLoad Pressure:15 mm; Nominal Resistance:2150 lbf; Case volume:53 mm; Drive Speed:1080 lbf; Control Fluid Drain:67 mm; Maximum Permissible Pilot Pressure:Contact Seal; Voltage:Round; Weight (approx.):Open; Torque:Light Duty; Flow:0.866 in; Pilot Pressure:Two-Bolt Flange; Moment of inertia rotary group:Cannot Be Relubricated; Displacement, geometric, per revolution:ZDC Alloy with Electroless Chromate Finish; Determining Operating Characteristics:MUFL000C; Rotary stiffness:Eccentric Collar; Maximum Axial Force At Standstill:MU002;

 

R900938819 Bosch Rexroth Vane PumpBuy R900938819 Bosch Rexroth Vane Pump online today with confidence thanks to our real-time inventory Additional Info: PVV4-1X/113RA15UMCFixed displacement vane pumps - Robucon1X. 15. *. 4/22. Bosch Rexroth AG Hydraulics. PVV; PVQ RE 10335/10.05 .. PVV4. PVV2. PVV1. 0. 20. 140. 3000. 500. PVV1 / PVQ1. 046. 040. 036. 027. 018

Bosch Rexroth PVV4-1X/113RA15UMC Vane pump - MercateoBosch Rexroth PVV4-1X/113RA15UMC Vane pump (R900938819) in 'Industrial products' > 'Industrial products': Order best price offers online for Bosch Bosch Rexroth Hydraulics R900938819, PVV4-1XBosch Rexroth Hydraulics R900938819, PVV4-1X/113RA15UMC. Fixed displacement vane pump, 6.88 cu-in per revolution, 3045 psi maximum operating PUMPS PVV BOSCH REXROTH - ParmafluidPUMPS PVV BOSCH REXROTH. PUMPS PVV BOSCH REXROTH Industrial version. Component Series 1X. Size 18193. Max operating pressure 210 barPVV – Fixed displacement vane pumps | Bosch Rexroth USAR900926823, PVV2-1X/068RA15UMB, 3, 10, RE10335. R900936293, PVV4-1X/069RA15DMC, 3, 10, RE10335. R900931548, PVV4-1X/082RA15DMC, 5, 10 Product Information For PVV4-1X/113RA15UMCProduct Information For PVV4-1X/113RA15UMC. Rexroth PVV PVQ Fixed Volume Vane Pumps re10335_2005-10.pdfRexroth Vane Pumps PVV4-1X/122RA15UMC - Saar HydraulicQuality Vane Pumps manufacturers & exporter - buy Rexroth Vane Pumps PVV4-1X/122RA15UMC from China manufacturer

 

Rexroth PVV4-1X/113RA15UMC Vane pump Video

 

All Products Contact Now
Contact Us