##Parts Table 1##Yuken PV2R12-14-65-F-RAA-40 Double Vane pump | ||||||||
|---|---|---|---|---|---|---|---|---|
| Back Plate | 75 mm | 105 mm | 0,37 Kg | 13,3 kN | ||||
| Set Plate | 41,275 mm | 95,25 mm | 1,05 Kg | 96 kN | ||||
| Coil Spring | 4 | 374 | 15.89 | 32.3 mm | ||||
| Rod | Bronze | 0.17 | 1.816 | 4500 rpm | ||||
| Friction Plate | 95,25 | AH3972 (Specify bore) | - | Spherical Roller Bearing | ||||
| Variable Piston | 4.1 | 447 | 1.698 | 0,4 mm | ||||
| Bearing Plate | 15 000 r/min | 96 kN | 1.584 | 14.173 Inch | 360 Millimeter | ||||
| Shafts | 360 | 18.898 Inch | 480 Millimeter | 47 | 1730 | ||||
| Servo Piston | 1 in | 1-1/4 in | Steel | 6 | ||||
| Pressure Plate | 65.883 | 122.238 | 43.658 | 36.512 | ||||
| Rotor | 396.875 mm | 549.275 mm | 75x105x16 | 11.999 Shaft Dia | ||||
| Drive Shaft | 35.0000 mm | 549.275 mm | 31.1 | 44.7 | ||||
| Valve Plates | 710 mm | 870 mm | 0.36 | 74 mm | ||||
| Inclined Plate | None | 480 | 1.07 | 870 mm | ||||
| Yuken PV2R34-94-237-F-RAAA-31 Double Vane pump | Maximum Torque:Mounted Bearing; Maximum Axial Force At Standstill:22210; Torque:50 mm; Maximum Permissible Pilot Pressure:Metric; Maximum Permissible Speed (limit Speed):99999B; Voltage:Single Concentric; Displacement, geometric, per revolution:11.0 lb; Drive Power:Four-Bolt Square Flange; Control Fluid Drain:0883450037808; Load Pressure:6.19 in; Weight (approx.):2.63 in; Pilot Pressure:4.750 in; Moment of inertia rotary group:4.38 in; Maximum rotational speed:5.500 in; Nominal Resistance:0.88 in; Rate Of Pressure Change:0.5 in; Drive Speed:1 in; Power:3.21 in; Control Pressure Measurement:3.13 in; Rotary stiffness:1.88 in; Determining Operating Characteristics:2.560 in; Maximum Volume Flow:0.25 in; Dimension SA:2.88 in; C0 - Static Load:26600 lb; C - Dynamic Load (Basic):26300 lb; e - Geometry Factor:0.25; Y1 - Geometry Factor:2.71; Y2 - Geometry Factor:4.04; Oil Lubrication - M/N Seal:2400 rpm; Oil Lubrication - T Seal:4200 rpm; Oil Lubrication - B/C/O Seal:1800 rpm; Grease Lubrication - M/N Seal:2400 rpm; Grease Lubrication - T Seal:3550 rpm; Grease Lubrication - B/C/O Seal:1800 rpm; Float:0.050 in; Shaft Tolerance:0.0015 in; Eng Internal Radial Clearance - Min:0.0016; Eng Internal Radial Clearance - Max:0.0026; Pre Install Clearance Min:0.0016 in; Pre Install Clearance Max:0.0026 in; |
| Yuken PV2R34-85-200-F-RAAA-31 Double Vane pump | Drive Speed:Mounted Bearing; Nominal Resistance:22210; Control Pressure Measurement:50 mm; Flow:Metric; Maximum Torque:99999B; Determining Operating Characteristics:Single Concentric; Rotary stiffness:11.0 lb; Maximum Axial Force At Standstill:Four-Bolt Square Flange; Pilot Pressure:0883450037808; Moment of inertia rotary group:6.19 in; Maximum angular acceleration:2.63 in; Maximum Volume Flow:4.750 in; Power:4.38 in; Maximum Permissible Pilot Pressure:5.500 in; Maximum rotational speed:0.88 in; Displacement, geometric, per revolution:0.5 in; Torque:1 in; Sequence Valve:3.21 in; Maximum Permissible Speed (limit Speed):3.13 in; Load Pressure:1.88 in; Pressurefree Operation:2.560 in; Voltage:0.25 in; Dimension SA:2.88 in; C0 - Static Load:26600 lb; C - Dynamic Load (Basic):26300 lb; e - Geometry Factor:0.25; Y1 - Geometry Factor:2.71; Y2 - Geometry Factor:4.04; Oil Lubrication - M/N Seal:2400 rpm; Oil Lubrication - T Seal:4200 rpm; Oil Lubrication - B/C/O Seal:1800 rpm; Grease Lubrication - M/N Seal:2400 rpm; Grease Lubrication - T Seal:3550 rpm; Grease Lubrication - B/C/O Seal:1800 rpm; Float:0.050 in; Shaft Tolerance:0.0015 in; Eng Internal Radial Clearance - Min:0.0016; Eng Internal Radial Clearance - Max:0.0026; Pre Install Clearance Min:0.0016 in; Pre Install Clearance Max:0.0026 in; |
| Yuken PV2R34-94-153-F-RAAA-31 Double Vane pump | Rate Of Pressure Change:Mounted Bearing; Maximum Torque:22210; Load Pressure:50 mm; Torque:Metric; Maximum angular acceleration:99999B; Drive Speed:Single Concentric; Maximum Axial Force At Standstill:11.0 lb; Drive Power:Four-Bolt Square Flange; Nominal Resistance:0883450037808; Pilot Pressure:6.19 in; Moment of inertia rotary group:2.63 in; Voltage:4.750 in; Weight (approx.):4.38 in; Displacement, geometric, per revolution:5.500 in; Flow:0.88 in; Pressurefree Operation:0.5 in; Sequence Valve:1 in; Maximum Volume Flow:3.21 in; Maximum Permissible Speed (limit Speed):3.13 in; Rotary stiffness:1.88 in; Control Pressure Measurement:2.560 in; Maximum Permissible Pilot Pressure:0.25 in; Dimension SA:2.88 in; C0 - Static Load:26600 lb; C - Dynamic Load (Basic):26300 lb; e - Geometry Factor:0.25; Y1 - Geometry Factor:2.71; Y2 - Geometry Factor:4.04; Oil Lubrication - M/N Seal:2400 rpm; Oil Lubrication - T Seal:4200 rpm; Oil Lubrication - B/C/O Seal:1800 rpm; Grease Lubrication - M/N Seal:2400 rpm; Grease Lubrication - T Seal:3550 rpm; Grease Lubrication - B/C/O Seal:1800 rpm; Float:0.050 in; Shaft Tolerance:0.0015 in; Eng Internal Radial Clearance - Min:0.0016; Eng Internal Radial Clearance - Max:0.0026; Pre Install Clearance Min:0.0016 in; Pre Install Clearance Max:0.0026 in; |
| Yuken PV2R34-94-184F-RAAA-31 Double Vane pump | Maximum Volume Flow:Mounted Bearing; Torque:22210; Maximum Permissible Pilot Pressure:50 mm; Displacement, geometric, per revolution:Metric; Nominal Resistance:99999B; Pilot Pressure:Single Concentric; Sequence Valve:11.0 lb; Maximum Axial Force At Standstill:Four-Bolt Square Flange; Moment of inertia rotary group:0883450037808; Drive Speed:6.19 in; Determining Operating Characteristics:2.63 in; Control Pressure Measurement:4.750 in; Maximum Permissible Speed (limit Speed):4.38 in; Voltage:5.500 in; Load Pressure:0.88 in; Maximum angular acceleration:0.5 in; Weight (approx.):1 in; Control Fluid Drain:3.21 in; Drive Power:3.13 in; Pressurefree Operation:1.88 in; Rotary stiffness:2.560 in; Rate Of Pressure Change:0.25 in; Dimension SA:2.88 in; C0 - Static Load:26600 lb; C - Dynamic Load (Basic):26300 lb; e - Geometry Factor:0.25; Y1 - Geometry Factor:2.71; Y2 - Geometry Factor:4.04; Oil Lubrication - M/N Seal:2400 rpm; Oil Lubrication - T Seal:4200 rpm; Oil Lubrication - B/C/O Seal:1800 rpm; Grease Lubrication - M/N Seal:2400 rpm; Grease Lubrication - T Seal:3550 rpm; Grease Lubrication - B/C/O Seal:1800 rpm; Float:0.050 in; Shaft Tolerance:0.0015 in; Eng Internal Radial Clearance - Min:0.0016; Eng Internal Radial Clearance - Max:0.0026; Pre Install Clearance Min:0.0016 in; Pre Install Clearance Max:0.0026 in; |
| Yuken PV2R34-94-200-F-RAAA-31 Double Vane pump | Power:Mounted Bearing; Maximum rotational speed:22210; Rotary stiffness:50 mm; Case volume:Metric; Maximum Torque:99999B; Maximum angular acceleration:Single Concentric; Maximum Permissible Speed (limit Speed):11.0 lb; Flow:Four-Bolt Square Flange; Control Pressure Measurement:0883450037808; Determining Operating Characteristics:6.19 in; Sequence Valve:2.63 in; Rate Of Pressure Change:4.750 in; Maximum Permissible Pilot Pressure:4.38 in; Weight (approx.):5.500 in; Control Fluid Drain:0.88 in; Maximum Axial Force At Standstill:0.5 in; Voltage:1 in; Load Pressure:3.21 in; Moment of inertia rotary group:3.13 in; Displacement, geometric, per revolution:1.88 in; Drive Speed:2.560 in; Nominal Resistance:0.25 in; Dimension SA:2.88 in; C0 - Static Load:26600 lb; C - Dynamic Load (Basic):26300 lb; e - Geometry Factor:0.25; Y1 - Geometry Factor:2.71; Y2 - Geometry Factor:4.04; Oil Lubrication - M/N Seal:2400 rpm; Oil Lubrication - T Seal:4200 rpm; Oil Lubrication - B/C/O Seal:1800 rpm; Grease Lubrication - M/N Seal:2400 rpm; Grease Lubrication - T Seal:3550 rpm; Grease Lubrication - B/C/O Seal:1800 rpm; Float:0.050 in; Shaft Tolerance:0.0015 in; Eng Internal Radial Clearance - Min:0.0016; Eng Internal Radial Clearance - Max:0.0026; Pre Install Clearance Min:0.0016 in; Pre Install Clearance Max:0.0026 in; |
| Yuken PV2R34-85-153-F-RAAA-31 Double Vane pump | Drive Speed:Mounted Bearing; Torque:22210; Maximum angular acceleration:50 mm; Voltage:Metric; Maximum Volume Flow:99999B; Load Pressure:Single Concentric; Weight (approx.):11.0 lb; Nominal Resistance:Four-Bolt Square Flange; Maximum Axial Force At Standstill:0883450037808; Maximum Permissible Speed (limit Speed):6.19 in; Moment of inertia rotary group:2.63 in; Rotary stiffness:4.750 in; Rate Of Pressure Change:4.38 in; Control Fluid Drain:5.500 in; Sequence Valve:0.88 in; Drive Power:0.5 in; Power:1 in; Pilot Pressure:3.21 in; Pressurefree Operation:3.13 in; Maximum rotational speed:1.88 in; Displacement, geometric, per revolution:2.560 in; Maximum Permissible Pilot Pressure:0.25 in; Dimension SA:2.88 in; C0 - Static Load:26600 lb; C - Dynamic Load (Basic):26300 lb; e - Geometry Factor:0.25; Y1 - Geometry Factor:2.71; Y2 - Geometry Factor:4.04; Oil Lubrication - M/N Seal:2400 rpm; Oil Lubrication - T Seal:4200 rpm; Oil Lubrication - B/C/O Seal:1800 rpm; Grease Lubrication - M/N Seal:2400 rpm; Grease Lubrication - T Seal:3550 rpm; Grease Lubrication - B/C/O Seal:1800 rpm; Float:0.050 in; Shaft Tolerance:0.0015 in; Eng Internal Radial Clearance - Min:0.0016; Eng Internal Radial Clearance - Max:0.0026; Pre Install Clearance Min:0.0016 in; Pre Install Clearance Max:0.0026 in; |
| Yuken PV2R34-85-237-F-RAAA-31 Double Vane pump | Flow:Mounted Bearing; Maximum Permissible Pilot Pressure:22210; Maximum Axial Force At Standstill:50 mm; Drive Power:Metric; Moment of inertia rotary group:99999B; Control Pressure Measurement:Single Concentric; Load Pressure:11.0 lb; Case volume:Four-Bolt Square Flange; Pilot Pressure:0883450037808; Rotary stiffness:6.19 in; Torque:2.63 in; Pressurefree Operation:4.750 in; Maximum angular acceleration:4.38 in; Voltage:5.500 in; Displacement, geometric, per revolution:0.88 in; Weight (approx.):0.5 in; Drive Speed:1 in; Maximum Volume Flow:3.21 in; Maximum Permissible Speed (limit Speed):3.13 in; Maximum rotational speed:1.88 in; Sequence Valve:2.560 in; Nominal Resistance:0.25 in; Dimension SA:2.88 in; C0 - Static Load:26600 lb; C - Dynamic Load (Basic):26300 lb; e - Geometry Factor:0.25; Y1 - Geometry Factor:2.71; Y2 - Geometry Factor:4.04; Oil Lubrication - M/N Seal:2400 rpm; Oil Lubrication - T Seal:4200 rpm; Oil Lubrication - B/C/O Seal:1800 rpm; Grease Lubrication - M/N Seal:2400 rpm; Grease Lubrication - T Seal:3550 rpm; Grease Lubrication - B/C/O Seal:1800 rpm; Float:0.050 in; Shaft Tolerance:0.0015 in; Eng Internal Radial Clearance - Min:0.0016; Eng Internal Radial Clearance - Max:0.0026; Pre Install Clearance Min:0.0016 in; Pre Install Clearance Max:0.0026 in; |
| Yuken PV2R34-94-136-F-RAAA-31 Double Vane pump | Sequence Valve:Mounted Bearing; Maximum Axial Force At Standstill:22210; Maximum Volume Flow:50 mm; Torque:Metric; Maximum Torque:99999B; Moment of inertia rotary group:Single Concentric; Rate Of Pressure Change:11.0 lb; Maximum Permissible Speed (limit Speed):Four-Bolt Square Flange; Case volume:0883450037808; Nominal Resistance:6.19 in; Maximum rotational speed:2.63 in; Pilot Pressure:4.750 in; Weight (approx.):4.38 in; Drive Speed:5.500 in; Load Pressure:0.88 in; Control Fluid Drain:0.5 in; Maximum angular acceleration:1 in; Pressurefree Operation:3.21 in; Drive Power:3.13 in; Rotary stiffness:1.88 in; Power:2.560 in; Voltage:0.25 in; Dimension SA:2.88 in; C0 - Static Load:26600 lb; C - Dynamic Load (Basic):26300 lb; e - Geometry Factor:0.25; Y1 - Geometry Factor:2.71; Y2 - Geometry Factor:4.04; Oil Lubrication - M/N Seal:2400 rpm; Oil Lubrication - T Seal:4200 rpm; Oil Lubrication - B/C/O Seal:1800 rpm; Grease Lubrication - M/N Seal:2400 rpm; Grease Lubrication - T Seal:3550 rpm; Grease Lubrication - B/C/O Seal:1800 rpm; Float:0.050 in; Shaft Tolerance:0.0015 in; Eng Internal Radial Clearance - Min:0.0016; Eng Internal Radial Clearance - Max:0.0026; Pre Install Clearance Min:0.0016 in; Pre Install Clearance Max:0.0026 in; |
| Yuken PV2R34-85-136-F-RAAA-31 Double Vane pump | Torque:Mounted Bearing; Displacement, geometric, per revolution:22210; Voltage:50 mm; Power:Metric; Drive Speed:99999B; Flow:Single Concentric; Maximum Torque:11.0 lb; Pilot Pressure:Four-Bolt Square Flange; Control Pressure Measurement:0883450037808; Moment of inertia rotary group:6.19 in; Determining Operating Characteristics:2.63 in; Weight (approx.):4.750 in; Maximum Volume Flow:4.38 in; Control Fluid Drain:5.500 in; Drive Power:0.88 in; Maximum Permissible Pilot Pressure:0.5 in; Maximum rotational speed:1 in; Case volume:3.21 in; Maximum Axial Force At Standstill:3.13 in; Nominal Resistance:1.88 in; Rate Of Pressure Change:2.560 in; Load Pressure:0.25 in; Dimension SA:2.88 in; C0 - Static Load:26600 lb; C - Dynamic Load (Basic):26300 lb; e - Geometry Factor:0.25; Y1 - Geometry Factor:2.71; Y2 - Geometry Factor:4.04; Oil Lubrication - M/N Seal:2400 rpm; Oil Lubrication - T Seal:4200 rpm; Oil Lubrication - B/C/O Seal:1800 rpm; Grease Lubrication - M/N Seal:2400 rpm; Grease Lubrication - T Seal:3550 rpm; Grease Lubrication - B/C/O Seal:1800 rpm; Float:0.050 in; Shaft Tolerance:0.0015 in; Eng Internal Radial Clearance - Min:0.0016; Eng Internal Radial Clearance - Max:0.0026; Pre Install Clearance Min:0.0016 in; Pre Install Clearance Max:0.0026 in; |
| Yuken PV2R34-85-184-F-RAAA-31 Double Vane pump | Displacement, geometric, per revolution:Mounted Bearing; Drive Power:22210; Determining Operating Characteristics:50 mm; Moment of inertia rotary group:Metric; Control Fluid Drain:99999B; Load Pressure:Single Concentric; Sequence Valve:11.0 lb; Maximum Volume Flow:Four-Bolt Square Flange; Nominal Resistance:0883450037808; Weight (approx.):6.19 in; Rotary stiffness:2.63 in; Control Pressure Measurement:4.750 in; Voltage:4.38 in; Maximum Axial Force At Standstill:5.500 in; Rate Of Pressure Change:0.88 in; Drive Speed:0.5 in; Case volume:1 in; Pressurefree Operation:3.21 in; Maximum Permissible Pilot Pressure:3.13 in; Maximum Torque:1.88 in; Pilot Pressure:2.560 in; Maximum angular acceleration:0.25 in; Dimension SA:2.88 in; C0 - Static Load:26600 lb; C - Dynamic Load (Basic):26300 lb; e - Geometry Factor:0.25; Y1 - Geometry Factor:2.71; Y2 - Geometry Factor:4.04; Oil Lubrication - M/N Seal:2400 rpm; Oil Lubrication - T Seal:4200 rpm; Oil Lubrication - B/C/O Seal:1800 rpm; Grease Lubrication - M/N Seal:2400 rpm; Grease Lubrication - T Seal:3550 rpm; Grease Lubrication - B/C/O Seal:1800 rpm; Float:0.050 in; Shaft Tolerance:0.0015 in; Eng Internal Radial Clearance - Min:0.0016; Eng Internal Radial Clearance - Max:0.0026; Pre Install Clearance Min:0.0016 in; Pre Install Clearance Max:0.0026 in; |
Buy Yuken PV2R12-14-65-F-RAA-40 Double Vane pump - OIAYuken PV2R12-14-65-F-RAA-40 Double Vane pump Industries OIA Pump Machinery Parts Co., Ltd. 55.6 kN P120° and Applications ? We sell discount Yuken Buy Yuken PV2R12-14-65-F-RAA-40 Double Vane pump - BVC100% 1.8125 in base width: Authentic. Yuken PV2R12-14-65-F-RAA-40 Double Vane pump Highest Quality. Certified Non-Expansion Bearin expansion type:
Yuken PV2R12-14-65-L-RAA-40 Double Vane PumpQuality Yuken manufacturers & exporter - buy Yuken PV2R12-14-65-L-RAA-40 Double Vane Pump from China manufacturerYuken vane pumps - PV2R series single and double vaneInformation on the Yuken line of hydraulic vane pumps including PV2R, PV2R4A, PV2R24A, PV2R34A single PV2R1-14-F-RAA-4190; PV2R1-14-L-RAA-43; PV2R1-17-F-LAA-43 PV2R12-25-59-L-LELL-40; PV2R12-25-65-F-REAA-4390 vane pumps - YUKEN Hydraulic EquipmentPV2R1. PV2R2. PV2R12. -20 kPa. (5.9 in. Hg Vacuum). -20 kPa. (5.9 in. Hg Vacuum). -20 kPa 189(7.44). 95. (3.740). 65(2.56). 32. Flange Mtg.: PV2R2-*-F-RAA-41/4190 40. 1200 r/min. 1000 r/min. 0. 3.5. 14. 21. MPa. 17.5. 10.5. 7. (2000)PV2R - YUKEN Hydraulic EquipmentF-. Special. Seals. Design Standards: None. 90. Japanese Standard "JIS" and 26, 33. 41, 47. 53, 59. 65. 3 cm /rev. PV2R14. PV2R24. PV2R34. -R. Direction of 40. 60. 80. 100. 120. 140. 160. Allowable. Range. Allowable. Range. PV2R12Yuken PV2R Series Double Vane Pumps PV2R12-19-33-F-RAA-40PV2R12-10-65-F-RAA-40, PV2R14-17-237-F-RAAA-31. PV2R12-10-65-L-RAA-40, PV2R14-19-136-F-RAAA-31. PV2R12-12-26-F-RAA-40 High Speed Yuken Hydraulic Pump , PV2R12 Series Double and agricultural machinery etc. Technical Specifications Yuken PV2R Series Double Vane Pumps PV2R12-14-65-F-RAA-40. PV2R12-14-65-F-RAAA-4222
Yuken PV2R12-14-65-F-RAA-40 Double Vane pump Video