##Parts Table 1##Yuken PV2R12-31-41-F-RAA-40 Double Vane pump | ||||||||
|---|---|---|---|---|---|---|---|---|
| Bushing Spring | 160,000 mm | 36,000 mm | Metric | 155,18 mm | ||||
| Coil Spring | 80,000 mm | 40,000 mm | Straight | Solid | ||||
| Swash Plate | 155,18 mm | 43 mm | 40x80x36 | Small | ||||
| Shafts | 4.76 Inch | 120.904 Millimeter | 4.528 Inch | 115 Millimeter | 23.608 | 0.0 | ||||
| Pressure Plate | Double Row | Extreme Duty | Urethane Seal | 23.608 | 0.045 | 0.0 | ||||
| Pump Right Rotating Group | 7.874 Inch | 200 Millimeter | 4.331 Inch | 110 Millimeter | 5.144 | 0.0 | ||||
| Spacer | 0.236 Inch / 6 Millimeter | Straight | 129.274 | 0.0 | ||||
| Set Plate | Double Row | Extreme Duty | Urethane Seal | Single Row | - | 0.0 | ||||
| Cylinder Block | 180 mm | 100 mm | 31411705 | HMSA10 | ||||
| Variable Piston | 52 mm | http://www.ntnamerica.com | Plain Inner Ring | 2 Rib Outer Ring | Blind Dowel Hole in Outer Ring OD | Cage on Outer Ring ID | 22 | ||||
| Gear Pump | http://www.qmbearings.com | 37x52x22 | 155,18 mm | 37 mm | ||||
| Yuken PV2R34-85-184-F-RAAA-31 Double Vane pump | Displacement, geometric, per revolution:Cam Follower and Track Roller - Stud Type; Case volume:0.0; Drive Speed:CONSOLIDATED BEARING; Maximum Torque:N/A; Maximum Axial Force At Standstill:0.04; Torque:B04120; Power:Crowned; Control Fluid Drain:Stud Type; Voltage:3/8-24; Rate Of Pressure Change:Standard Stud with Eccentric Bushing; Drive Power:Sealed; Determining Operating Characteristics:Needle Bearing; Sequence Valve:Yes; Flow:Yes; Maximum angular acceleration:Inch; Rotary stiffness:With Nut; Load Pressure:3/4" Roller Diameter; 1/2" Roller Width; Crowned Roller Surface; Stud Type; 3/8" Stud Diameter; 3/8-24; Pressurefree Operation:Cam Followers Stud Type; Nominal Resistance:31171530; Pilot Pressure:8482.40.00.00; Weight (approx.):Bearing; Moment of inertia rotary group:Cam Follower; Manufacturer Item Number:CRSBCE-12; Weight / LBS:0.076; Roller Width:0.5 Inch | 12.7 Millimeter; Stud Diameter:0.375 Inch | 9.525 Millimeter; Roller Diameter:0.75 Inch | 19.05 Millimeter; |
| Yuken PV2R34-94-136-F-RAAA-31 Double Vane pump | Drive Power:Cam Follower and Track Roller - Stud Type; Power:0.0; Case volume:CONSOLIDATED BEARING; Maximum Permissible Speed (limit Speed):N/A; Rotary stiffness:0.04; Maximum Volume Flow:B04120; Voltage:Crowned; Maximum Axial Force At Standstill:Stud Type; Load Pressure:3/8-24; Nominal Resistance:Standard Stud with Eccentric Bushing; Rate Of Pressure Change:Sealed; Maximum angular acceleration:Needle Bearing; Maximum rotational speed:Yes; Pilot Pressure:Yes; Maximum Permissible Pilot Pressure:Inch; Drive Speed:With Nut; Maximum Torque:3/4" Roller Diameter; 1/2" Roller Width; Crowned Roller Surface; Stud Type; 3/8" Stud Diameter; 3/8-24; Pressurefree Operation:Cam Followers Stud Type; Determining Operating Characteristics:31171530; Sequence Valve:8482.40.00.00; Displacement, geometric, per revolution:Bearing; Moment of inertia rotary group:Cam Follower; Manufacturer Item Number:CRSBCE-12; Weight / LBS:0.076; Roller Width:0.5 Inch | 12.7 Millimeter; Stud Diameter:0.375 Inch | 9.525 Millimeter; Roller Diameter:0.75 Inch | 19.05 Millimeter; |
| Yuken PV2R34-94-200-F-RAAA-31 Double Vane pump | Maximum rotational speed:Cam Follower and Track Roller - Stud Type; Pressurefree Operation:0.0; Control Pressure Measurement:CONSOLIDATED BEARING; Maximum Permissible Speed (limit Speed):N/A; Rotary stiffness:0.04; Torque:B04120; Voltage:Crowned; Determining Operating Characteristics:Stud Type; Flow:3/8-24; Maximum angular acceleration:Standard Stud with Eccentric Bushing; Maximum Torque:Sealed; Power:Needle Bearing; Moment of inertia rotary group:Yes; Rate Of Pressure Change:Yes; Maximum Permissible Pilot Pressure:Inch; Drive Speed:With Nut; Weight (approx.):3/4" Roller Diameter; 1/2" Roller Width; Crowned Roller Surface; Stud Type; 3/8" Stud Diameter; 3/8-24; Load Pressure:Cam Followers Stud Type; Maximum Volume Flow:31171530; Control Fluid Drain:8482.40.00.00; Pilot Pressure:Bearing; Case volume:Cam Follower; Manufacturer Item Number:CRSBCE-12; Weight / LBS:0.076; Roller Width:0.5 Inch | 12.7 Millimeter; Stud Diameter:0.375 Inch | 9.525 Millimeter; Roller Diameter:0.75 Inch | 19.05 Millimeter; |
| Yuken PV2R34-85-237-F-RAAA-31 Double Vane pump | Control Fluid Drain:Cam Follower and Track Roller - Stud Type; Maximum Torque:0.0; Maximum Axial Force At Standstill:CONSOLIDATED BEARING; Determining Operating Characteristics:N/A; Drive Speed:0.04; Pressurefree Operation:B04120; Pilot Pressure:Crowned; Flow:Stud Type; Case volume:3/8-24; Sequence Valve:Standard Stud with Eccentric Bushing; Torque:Sealed; Load Pressure:Needle Bearing; Power:Yes; Maximum angular acceleration:Yes; Control Pressure Measurement:Inch; Voltage:With Nut; Maximum Volume Flow:3/4" Roller Diameter; 1/2" Roller Width; Crowned Roller Surface; Stud Type; 3/8" Stud Diameter; 3/8-24; Maximum rotational speed:Cam Followers Stud Type; Nominal Resistance:31171530; Maximum Permissible Pilot Pressure:8482.40.00.00; Rate Of Pressure Change:Bearing; Rotary stiffness:Cam Follower; Manufacturer Item Number:CRSBCE-12; Weight / LBS:0.076; Roller Width:0.5 Inch | 12.7 Millimeter; Stud Diameter:0.375 Inch | 9.525 Millimeter; Roller Diameter:0.75 Inch | 19.05 Millimeter; |
| Yuken PV2R34-85-200-F-RAAA-31 Double Vane pump | Rotary stiffness:Cam Follower and Track Roller - Stud Type; Weight (approx.):0.0; Maximum Volume Flow:CONSOLIDATED BEARING; Moment of inertia rotary group:N/A; Maximum Permissible Speed (limit Speed):0.04; Power:B04120; Maximum angular acceleration:Crowned; Drive Power:Stud Type; Flow:3/8-24; Maximum Permissible Pilot Pressure:Standard Stud with Eccentric Bushing; Torque:Sealed; Pressurefree Operation:Needle Bearing; Maximum Torque:Yes; Case volume:Yes; Rate Of Pressure Change:Inch; Displacement, geometric, per revolution:With Nut; Pilot Pressure:3/4" Roller Diameter; 1/2" Roller Width; Crowned Roller Surface; Stud Type; 3/8" Stud Diameter; 3/8-24; Nominal Resistance:Cam Followers Stud Type; Control Pressure Measurement:31171530; Determining Operating Characteristics:8482.40.00.00; Voltage:Bearing; Sequence Valve:Cam Follower; Manufacturer Item Number:CRSBCE-12; Weight / LBS:0.076; Roller Width:0.5 Inch | 12.7 Millimeter; Stud Diameter:0.375 Inch | 9.525 Millimeter; Roller Diameter:0.75 Inch | 19.05 Millimeter; |
| Yuken PV2R34-85-136-F-RAAA-31 Double Vane pump | Flow:Cam Follower and Track Roller - Stud Type; Maximum Torque:0.0; Power:CONSOLIDATED BEARING; Drive Speed:N/A; Maximum angular acceleration:0.04; Control Fluid Drain:B04120; Nominal Resistance:Crowned; Rotary stiffness:Stud Type; Maximum Axial Force At Standstill:3/8-24; Moment of inertia rotary group:Standard Stud with Eccentric Bushing; Pressurefree Operation:Sealed; Rate Of Pressure Change:Needle Bearing; Maximum Permissible Pilot Pressure:Yes; Control Pressure Measurement:Yes; Voltage:Inch; Torque:With Nut; Sequence Valve:3/4" Roller Diameter; 1/2" Roller Width; Crowned Roller Surface; Stud Type; 3/8" Stud Diameter; 3/8-24; Case volume:Cam Followers Stud Type; Drive Power:31171530; Maximum Volume Flow:8482.40.00.00; Maximum Permissible Speed (limit Speed):Bearing; Weight (approx.):Cam Follower; Manufacturer Item Number:CRSBCE-12; Weight / LBS:0.076; Roller Width:0.5 Inch | 12.7 Millimeter; Stud Diameter:0.375 Inch | 9.525 Millimeter; Roller Diameter:0.75 Inch | 19.05 Millimeter; |
| Yuken PV2R34-94-184F-RAAA-31 Double Vane pump | Sequence Valve:Cam Follower and Track Roller - Stud Type; Pilot Pressure:0.0; Load Pressure:CONSOLIDATED BEARING; Maximum Volume Flow:N/A; Maximum Torque:0.04; Rotary stiffness:B04120; Displacement, geometric, per revolution:Crowned; Nominal Resistance:Stud Type; Power:3/8-24; Maximum rotational speed:Standard Stud with Eccentric Bushing; Weight (approx.):Sealed; Maximum Permissible Pilot Pressure:Needle Bearing; Pressurefree Operation:Yes; Maximum Axial Force At Standstill:Yes; Torque:Inch; Determining Operating Characteristics:With Nut; Drive Speed:3/4" Roller Diameter; 1/2" Roller Width; Crowned Roller Surface; Stud Type; 3/8" Stud Diameter; 3/8-24; Voltage:Cam Followers Stud Type; Maximum Permissible Speed (limit Speed):31171530; Moment of inertia rotary group:8482.40.00.00; Drive Power:Bearing; Case volume:Cam Follower; Manufacturer Item Number:CRSBCE-12; Weight / LBS:0.076; Roller Width:0.5 Inch | 12.7 Millimeter; Stud Diameter:0.375 Inch | 9.525 Millimeter; Roller Diameter:0.75 Inch | 19.05 Millimeter; |
| Yuken PV2R34-94-237-F-RAAA-31 Double Vane pump | Voltage:Cam Follower and Track Roller - Stud Type; Pilot Pressure:0.0; Drive Power:CONSOLIDATED BEARING; Maximum rotational speed:N/A; Control Fluid Drain:0.04; Case volume:B04120; Control Pressure Measurement:Crowned; Maximum angular acceleration:Stud Type; Load Pressure:3/8-24; Rate Of Pressure Change:Standard Stud with Eccentric Bushing; Power:Sealed; Pressurefree Operation:Needle Bearing; Determining Operating Characteristics:Yes; Displacement, geometric, per revolution:Yes; Nominal Resistance:Inch; Torque:With Nut; Maximum Permissible Speed (limit Speed):3/4" Roller Diameter; 1/2" Roller Width; Crowned Roller Surface; Stud Type; 3/8" Stud Diameter; 3/8-24; Sequence Valve:Cam Followers Stud Type; Drive Speed:31171530; Rotary stiffness:8482.40.00.00; Maximum Torque:Bearing; Maximum Permissible Pilot Pressure:Cam Follower; Manufacturer Item Number:CRSBCE-12; Weight / LBS:0.076; Roller Width:0.5 Inch | 12.7 Millimeter; Stud Diameter:0.375 Inch | 9.525 Millimeter; Roller Diameter:0.75 Inch | 19.05 Millimeter; |
| Yuken PV2R34-85-153-F-RAAA-31 Double Vane pump | Maximum angular acceleration:Cam Follower and Track Roller - Stud Type; Sequence Valve:0.0; Rotary stiffness:CONSOLIDATED BEARING; Maximum Permissible Pilot Pressure:N/A; Pressurefree Operation:0.04; Control Fluid Drain:B04120; Displacement, geometric, per revolution:Crowned; Weight (approx.):Stud Type; Determining Operating Characteristics:3/8-24; Drive Speed:Standard Stud with Eccentric Bushing; Pilot Pressure:Sealed; Case volume:Needle Bearing; Rate Of Pressure Change:Yes; Moment of inertia rotary group:Yes; Maximum rotational speed:Inch; Drive Power:With Nut; Maximum Axial Force At Standstill:3/4" Roller Diameter; 1/2" Roller Width; Crowned Roller Surface; Stud Type; 3/8" Stud Diameter; 3/8-24; Maximum Permissible Speed (limit Speed):Cam Followers Stud Type; Maximum Torque:31171530; Flow:8482.40.00.00; Maximum Volume Flow:Bearing; Control Pressure Measurement:Cam Follower; Manufacturer Item Number:CRSBCE-12; Weight / LBS:0.076; Roller Width:0.5 Inch | 12.7 Millimeter; Stud Diameter:0.375 Inch | 9.525 Millimeter; Roller Diameter:0.75 Inch | 19.05 Millimeter; |
| Yuken PV2R34-94-153-F-RAAA-31 Double Vane pump | Voltage:Cam Follower and Track Roller - Stud Type; Pressurefree Operation:0.0; Nominal Resistance:CONSOLIDATED BEARING; Maximum Permissible Pilot Pressure:N/A; Rate Of Pressure Change:0.04; Weight (approx.):B04120; Maximum Torque:Crowned; Displacement, geometric, per revolution:Stud Type; Drive Power:3/8-24; Flow:Standard Stud with Eccentric Bushing; Maximum angular acceleration:Sealed; Load Pressure:Needle Bearing; Sequence Valve:Yes; Power:Yes; Maximum Volume Flow:Inch; Case volume:With Nut; Drive Speed:3/4" Roller Diameter; 1/2" Roller Width; Crowned Roller Surface; Stud Type; 3/8" Stud Diameter; 3/8-24; Control Fluid Drain:Cam Followers Stud Type; Rotary stiffness:31171530; Torque:8482.40.00.00; Maximum Axial Force At Standstill:Bearing; Maximum rotational speed:Cam Follower; Manufacturer Item Number:CRSBCE-12; Weight / LBS:0.076; Roller Width:0.5 Inch | 12.7 Millimeter; Stud Diameter:0.375 Inch | 9.525 Millimeter; Roller Diameter:0.75 Inch | 19.05 Millimeter; |
PV2R - YUKEN Hydraulic EquipmentPV2R13. PV2R23. PV2R33. 6, 8. 10, 12. 14, 17. 19, 23. 25, 31. 26, 33. 41, 47. 53, 59. 65 41, 47. 52, 60. 66, 76. 94, 116. Foot Mtg. L: Flange. Mtg. F: Clockwise 40. 60. 80. 100. 120. 140. 160. Allowable. Range. Allowable. Range. PV2R12Yuken vane pumps - PV2R series single and double vaneInformation on the Yuken line of hydraulic vane pumps including PV2R, PV2R4A, PV2R24A, PV2R1-8-L-RAA-4390; PV2R1-8-L-RLR-43; PV2R12-10-41-F-RGAB-41; PV2R12-10-47-F-REAA-41 PV2R12-25-59-L-LELL-40; PV2R12-25-65-F-REAA-4390 PV2R12-31-41-F-REAR-41; PV2R12-31-59-F-REAA-41
PV2R - YUKEN Hydraulic EquipmentF: Flange. Mounting. PV2R3. PV2R4. 6, 8, 10, 12. 14, 17, 19. 23, 25, 31. PV2R1 R9.5(R.37). 40(1.57). R8(R.31). 4.79 4.76. (.1886) (.1874). Key Width. 52.4 Flange Mtg.: PV2R1-*-F-RAA-42/4290 Flange Mtg.: PV2R2-*-F-RAA-41/4190PV2R12-23-41-F-RAA-40 Hydraulic Pump Yuken.. - IndiaMARTPV2R12-23-41-F-RAA-40 Hydraulic Pump Yuken PV2R12-23-41, For ASB Injection Moulding. ₹ 17,500/ Number Get Latest PV2R12-23-41. PV2R12-31-33Yuken PV2R12-25-41-F-RAA-40 Double Vane PumpBrand Name: Yuken. Model Number: Yuken Double Vane Pump PV2R12-25-41-F-RAA-40 PV2R13-31-94-F-RAAA-4222 PV2R14-10-136-F-RAAA-31YUKEN PV2R12-10-26-F-RAA-40 Pump - Hydraulic Pump25, 31. 26, 33. 41, 47 “PV2R” Series Double Vane Pumps. 184. Pump. Model. Numbers. PV2R12. (3.82). Sq. 40(1.57). 106.4. (4.189). 17.5. (.689). “C” Thd. “F” Yuken PV2R Series Double Vane Pumps PV2R12-10-33-F Name: Yuken. Model Number: PV2R12-10-33-F-RAA-40 Yuken PV2R Series Double Vane Pumps PV2R12-10-41-F-RAA-40, PV2R14-14-153-F-RAAA-31vane pumps - YUKEN Hydraulic EquipmentFoot. Mounting. F: Flange. Mounting. PV2R3. PV2R4. 6, 8, 10, 12. 14, 17, 19. 23, 25, 31. PV2R1. 41, 47, 53. 59, 65. 76, 94, 116. 136, 153, 184. 200, 237. Pump 145.5(5.73). 56 (2.20). Flange Mtg.: PV2R1-*-F-RAA-42/4290 40. 60. 80. 100. 120. 140. 160. Allowable. Range. Allowable. Range. PV2R12. PV2R33. Nominal
Yuken PV2R12-31-41-F-RAA-40 Double Vane pump Video