##Parts Table 1##Rexroth SV30GA1-4X/ check valve | ||||||||
|---|---|---|---|---|---|---|---|---|
| Bushing Spring | 76,2 mm | 111,125 mm | 20700 lbs | 30x60x9 | ||||
| Valve Plate | 2 Inch | 50.8 Millimeter | 3.14 Inch | 79.756 Millimeter | N/A | 0.0 | ||||
| Spindle | 0,113 Kg | Inner Ring - One Side | N/A | 0.0 | ||||
| Push Rod | 48300 | 31171547 | N/A | 0.0 | ||||
| Oil Distribution Plate | 2.756 Inch | 70 Millimeter | 4.921 Inch | 125 Millimeter | N/A | 0.0 | ||||
| Rotor | 258 | 2.756 Inch | 70 Millimeter | N/A | 0.0 | ||||
| Cylinder Blocks | 2.7500 in | ACBB_SR_MM_DT | 30x60x9 | 2,1 mm | ||||
| Plunger Sliding Boots | 200 mm | 70MM Bore; Straight Bore Profile; 125MM Outside Diameter; 31MM Width; Polymer Cage Matetrial; RBEC 1 | ISO P0; Single Row; Inner Ring - One Side Separable; No Snap Ring; Relubricatable; C3-Loose Inter | 77,7875 mm | 287,75 | ||||
| Swash Plate | 5.2500 in | 7.7148 in | 99 | 8482.50.00.00 | ||||
| Retainer Plate | 85 | 162.857 | Non-expansion | 1.2500 in | ||||
| Back Plate | 30 mm | 60 mm | L713000 | 7321 | ||||
| Swing | 30 mm | 62 mm | 40 | 11720 lbs | ||||
| Friction Plate | 200 mm | 310 mm | 2 Bolt Pillow Block | 70MM Bore; Straight Bore Profile; 125MM Outside Diameter; 31MM Width; Polymer Cage Matetrial; RBEC 1 | ISO P0; Single Row; Inner Ring - One Side Separable; No Snap Ring; Relubricatable; C3-Loose Inter | ||||
| Disc Springs | 1.5000 in | 30MM Bore; 62MM Outside Diameter; 32MM Width; Open Enclosure; ABEC 5 | ISO P5 Precision; Steel Ball Material; 2 (1 Pair) Bearings; 30 Degree Contact Angle; Polyamide Cage Material; 1 Rib Inner Ring an | 2 Bolt Pillow Block | 53,5 mm | ||||
| Rexroth 4WMM6E.J.H.5X/ check valve | Rotary stiffness:0.6250 in; Maximum angular acceleration:1000 lb; Torque:1.3440 in; Maximum Axial Force At Standstill:Grease; Displacement, geometric, per revolution:Female Threaded with Male Stud; Rate Of Pressure Change:Max 350°; Load Pressure:5/8-18; Maximum Permissible Pilot Pressure:1.5000 in; Case volume:Right Hand; Maximum Permissible Speed (limit Speed):.5620 in; Control Pressure Measurement:Commercial; Moment of inertia rotary group:.7500 in; Drive Power:With Lubrication Fitting; Pressurefree Operation:2.5000 in; Flow:Carbon Steel - corrosion resistant plating; Determining Operating Characteristics:CFF; Maximum Volume Flow:Alloy Steel - heat treated - chrome plated; Maximum rotational speed:1491009000; Weight (approx.):10000 lb; |
| Rexroth 4WMM6......./V check valve | Maximum Axial Force At Standstill:0.6250 in; Maximum Torque:1000 lb; Maximum Volume Flow:1.3440 in; Rotary stiffness:Grease; Voltage:Female Threaded with Male Stud; Sequence Valve:Max 350°; Control Pressure Measurement:5/8-18; Maximum angular acceleration:1.5000 in; Weight (approx.):Right Hand; Flow:.5620 in; Displacement, geometric, per revolution:Commercial; Moment of inertia rotary group:.7500 in; Control Fluid Drain:With Lubrication Fitting; Nominal Resistance:2.5000 in; Maximum Permissible Pilot Pressure:Carbon Steel - corrosion resistant plating; Case volume:CFF; Rate Of Pressure Change:Alloy Steel - heat treated - chrome plated; Maximum rotational speed:1491009000; Pressurefree Operation:10000 lb; |
| Rexroth SV30GB1-4X/ check valve | Control Fluid Drain:0.6250 in; Moment of inertia rotary group:1000 lb; Maximum Torque:1.3440 in; Torque:Grease; Displacement, geometric, per revolution:Female Threaded with Male Stud; Maximum angular acceleration:Max 350°; Case volume:5/8-18; Pilot Pressure:1.5000 in; Drive Speed:Right Hand; Control Pressure Measurement:.5620 in; Determining Operating Characteristics:Commercial; Nominal Resistance:.7500 in; Rate Of Pressure Change:With Lubrication Fitting; Maximum Volume Flow:2.5000 in; Maximum Permissible Pilot Pressure:Carbon Steel - corrosion resistant plating; Flow:CFF; Maximum rotational speed:Alloy Steel - heat treated - chrome plated; Voltage:1491009000; Sequence Valve:10000 lb; |
| Rexroth 4WMM6A.B.C.D.Y5X/ check valve | Maximum Permissible Speed (limit Speed):0.6250 in; Maximum angular acceleration:1000 lb; Pilot Pressure:1.3440 in; Drive Power:Grease; Determining Operating Characteristics:Female Threaded with Male Stud; Moment of inertia rotary group:Max 350°; Pressurefree Operation:5/8-18; Flow:1.5000 in; Maximum Permissible Pilot Pressure:Right Hand; Voltage:.5620 in; Drive Speed:Commercial; Sequence Valve:.7500 in; Rate Of Pressure Change:With Lubrication Fitting; Maximum Volume Flow:2.5000 in; Maximum Axial Force At Standstill:Carbon Steel - corrosion resistant plating; Load Pressure:CFF; Control Pressure Measurement:Alloy Steel - heat treated - chrome plated; Rotary stiffness:1491009000; Control Fluid Drain:10000 lb; |
| Rexroth WMM6.........5X/....../B10 B12 B15 check valve | Control Fluid Drain:0.6250 in; Control Pressure Measurement:1000 lb; Power:1.3440 in; Maximum Permissible Pilot Pressure:Grease; Maximum Volume Flow:Female Threaded with Male Stud; Maximum Permissible Speed (limit Speed):Max 350°; Moment of inertia rotary group:5/8-18; Load Pressure:1.5000 in; Drive Speed:Right Hand; Displacement, geometric, per revolution:.5620 in; Pressurefree Operation:Commercial; Drive Power:.7500 in; Rotary stiffness:With Lubrication Fitting; Maximum Torque:2.5000 in; Maximum rotational speed:Carbon Steel - corrosion resistant plating; Voltage:CFF; Torque:Alloy Steel - heat treated - chrome plated; Rate Of Pressure Change:1491009000; Case volume:10000 lb; |
| Rexroth WMM6A.B.C.D.Y5X/F check valve | Maximum Permissible Pilot Pressure:0.6250 in; Case volume:1000 lb; Rate Of Pressure Change:1.3440 in; Maximum Axial Force At Standstill:Grease; Sequence Valve:Female Threaded with Male Stud; Rotary stiffness:Max 350°; Maximum Volume Flow:5/8-18; Power:1.5000 in; Control Pressure Measurement:Right Hand; Maximum Permissible Speed (limit Speed):.5620 in; Pressurefree Operation:Commercial; Pilot Pressure:.7500 in; Maximum Torque:With Lubrication Fitting; Nominal Resistance:2.5000 in; Drive Power:Carbon Steel - corrosion resistant plating; Control Fluid Drain:CFF; Voltage:Alloy Steel - heat treated - chrome plated; Determining Operating Characteristics:1491009000; Moment of inertia rotary group:10000 lb; |
| Rexroth 4WMM6G.M.T.U.R.F.P.Q.W.L.5X/ check valve | Sequence Valve:0.6250 in; Power:1000 lb; Maximum Torque:1.3440 in; Weight (approx.):Grease; Pressurefree Operation:Female Threaded with Male Stud; Displacement, geometric, per revolution:Max 350°; Moment of inertia rotary group:5/8-18; Maximum Axial Force At Standstill:1.5000 in; Maximum Permissible Speed (limit Speed):Right Hand; Control Fluid Drain:.5620 in; Flow:Commercial; Torque:.7500 in; Determining Operating Characteristics:With Lubrication Fitting; Drive Power:2.5000 in; Control Pressure Measurement:Carbon Steel - corrosion resistant plating; Rotary stiffness:CFF; Rate Of Pressure Change:Alloy Steel - heat treated - chrome plated; Maximum Permissible Pilot Pressure:1491009000; Voltage:10000 lb; |
| Rexroth 4WMM6E.J.H.5X/F check valve | Maximum Torque:0.6250 in; Moment of inertia rotary group:1000 lb; Voltage:1.3440 in; Pilot Pressure:Grease; Rate Of Pressure Change:Female Threaded with Male Stud; Control Fluid Drain:Max 350°; Maximum Permissible Pilot Pressure:5/8-18; Load Pressure:1.5000 in; Power:Right Hand; Displacement, geometric, per revolution:.5620 in; Case volume:Commercial; Maximum angular acceleration:.7500 in; Pressurefree Operation:With Lubrication Fitting; Torque:2.5000 in; Drive Speed:Carbon Steel - corrosion resistant plating; Maximum rotational speed:CFF; Determining Operating Characteristics:Alloy Steel - heat treated - chrome plated; Rotary stiffness:1491009000; Flow:10000 lb; |
| Rexroth 4WMM6G.M.T.U.R.F.P.Q.W.L.5X/F check valve | Displacement, geometric, per revolution:0.6250 in; Maximum Permissible Speed (limit Speed):1000 lb; Power:1.3440 in; Moment of inertia rotary group:Grease; Control Pressure Measurement:Female Threaded with Male Stud; Maximum rotational speed:Max 350°; Weight (approx.):5/8-18; Pressurefree Operation:1.5000 in; Maximum Permissible Pilot Pressure:Right Hand; Pilot Pressure:.5620 in; Load Pressure:Commercial; Torque:.7500 in; Nominal Resistance:With Lubrication Fitting; Determining Operating Characteristics:2.5000 in; Rate Of Pressure Change:Carbon Steel - corrosion resistant plating; Maximum Volume Flow:CFF; Flow:Alloy Steel - heat treated - chrome plated; Drive Power:1491009000; Drive Speed:10000 lb; |
| Rexroth SL30GB1-4X/ check valve | Drive Power:0.6250 in; Voltage:1000 lb; Rate Of Pressure Change:1.3440 in; Flow:Grease; Pressurefree Operation:Female Threaded with Male Stud; Maximum Permissible Speed (limit Speed):Max 350°; Drive Speed:5/8-18; Pilot Pressure:1.5000 in; Maximum rotational speed:Right Hand; Control Pressure Measurement:.5620 in; Load Pressure:Commercial; Displacement, geometric, per revolution:.7500 in; Maximum angular acceleration:With Lubrication Fitting; Maximum Torque:2.5000 in; Determining Operating Characteristics:Carbon Steel - corrosion resistant plating; Maximum Permissible Pilot Pressure:CFF; Moment of inertia rotary group:Alloy Steel - heat treated - chrome plated; Maximum Volume Flow:1491009000; Weight (approx.):10000 lb; |
Rexroth SV30GA1-4X//12 Check Valve for sale – CheckPlace of Origin : Germany. Brand Name : Rexroth. Model Number : Rexroth Check Valve SV30GA1-4X//12. Contact Now. Rexroth SV SL Series Check valveBuy BOSCH REXROTH Check valves: SV,SL 30.-4x - HydrotechHydrotech - Buy Industrial Parts - Buy BOSCH REXROTH Check valves: SV,SL 30.-4x/ | SV30GA1-4X/ | R900587552 | Hydraulics
Check valve hydraulically pilot operated - Kanfluwww.boschrexroth.com/spc. Contents Bosch Rexroth AG Hydraulics. SV; SL RE 4X. *. Type SL. Material No. SL 10 GA1-4X/. R900483370. SL 10 GB1-4X/R900587552 SV30GA1-43/ SV30GA1-4X/ Rexroth Pilot OperatedHigh quality R900587552 SV30GA1-43/ SV30GA1-4X/ Rexroth Pilot Operated Check Valve from China, China's leading R900587552 product, with strict quality Rexroth SV30GA1-4X//12 Check ValveRexroth SV30GA1-4X//12 Check Valve. Nominal sizes 10 to 32. Component series 4X. Maximum operating pressure 315 bar. Maximum flow 550 l/min. Features Rexroth SV30GA1-4X//12 Check Valve - Hydraulic PumpsRexroth SV SL Series Check valve. Rexroth SV30GA1-4X//12 Check Valve. Nominal sizes 10 to 32. Component series 4X. Maximum operating pressure 315 Rexroth | Bosch RexrothThe SV and SL valves are hydraulic pilot operated check valves of poppet type design which may be opened to permit flow in the reverse direction. These valves Buy BOSCH REXROTH Check valves: SV,SL 30.-4x - HydrotechHydrotech - Buy Industrial Parts - Buy BOSCH REXROTH Check valves: SV,SL 30.-4x/ | SV30GA1-4X/V/12 | R900225857 | All Other Products
Rexroth SV30GA1-4X/ check valve Video