##Parts Table 1##Yuken CPG-10--50 pressure valve |
|---|
| Set Plate | 8 mm | 16 mm | 0,039 Kg | 1 Piece Solid |
| Valve Plates | 130 mm | 200 mm | 3,15 Kg | 6 mm |
| Coil Spring | 4.921 Inch | 125 Millimeter | 6.04 Inch | 153.416 Millimeter | 2.27 | N/A |
| Cylinder Blocks | 0 Inch | 0 Millimeter | 4.813 Inch | 122.25 Millimeter | 0.48 | N/A |
| Seal Kits | 2.5 Inch | 63.5 Millimeter | 3.37 Inch | 85.598 Millimeter | 7.264 | N/A |
| Ball Joint | 1.75 Inch | 44.45 Millimeter | 1.687 Inch | 42.85 Millimeter | - | N/A |
| The Thrust Plate | 2.165 Inch | 55 Millimeter | 4 Bolt Round Flange Cartridge; 2-1/2" Bore; 6-1/2" Bolt Circle; 4.6" Bolt Spacing; 1 Piece Solid; Eccentric Collar Mount; Cast Steel; Spherical Roller Bearing; 3.37" Length Thru Bo | 4 | N/A |
| Swing | 15 ° | 0.029 | 2.1 | N/A |
| Guide Ball | 0.4375 in | 52100 Bearing Steel Heat Treated Chrome Plated Precision Ground | Ball Bearing | Double Row |
| Retainer Plate | Cartridge | 30 | Open | 130 mm |
| Snap Ring | 90 | 36 mm | 26 | 1.125 Inch | 28.575 Millimeter |
| Swash Plate | 6 mm | 40 mm | No Pilot | 4.9 Inch | 125.7 Millimeter |
| Disc Springs | 100 mm | 215 mm | Flanged OD | With Keyway or Slot | Oil Seals |
| Oil Distribution Disc Plug | 10,2 mm | Shaft Mount | 6.04 Inch | 153.416 Millimeter | Metric |
| Yuken DSHG-04 pressure valve | Sequence Valve:3.1875 in; Maximum Axial Force At Standstill:Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary; Weight (approx.):Labyrinth; Maximum Volume Flow:3926904590.US; Control Fluid Drain:ISO-GARD® Flanged Design, Filled PTFE Rotor and Stator, FKM O-Rings, and 0.375" FlangeISO-GARD® Flanged; Torque:29502-0123; Maximum Torque:-22 to 400°F; Rotary stiffness:0.24 lb; Maximum angular acceleration:4500 fpm; Drive Speed:4.0000 in; Pressurefree Operation:0.020 in; Nominal Resistance:0.7500 in; Rate Of Pressure Change:Ambient; |
| Yuken DSHG-03 pressure valve | Nominal Resistance:3.1875 in; Flow:Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary; Pressurefree Operation:Labyrinth; Load Pressure:3926904590.US; Voltage:ISO-GARD® Flanged Design, Filled PTFE Rotor and Stator, FKM O-Rings, and 0.375" FlangeISO-GARD® Flanged; Moment of inertia rotary group:29502-0123; Drive Power:-22 to 400°F; Control Fluid Drain:0.24 lb; Maximum Permissible Speed (limit Speed):4500 fpm; Maximum Volume Flow:4.0000 in; Rotary stiffness:0.020 in; Displacement, geometric, per revolution:0.7500 in; Maximum angular acceleration:Ambient; |
| Yuken DSHG-10 pressure valve | Maximum Axial Force At Standstill:3.1875 in; Drive Speed:Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary; Torque:Labyrinth; Weight (approx.):3926904590.US; Nominal Resistance:ISO-GARD® Flanged Design, Filled PTFE Rotor and Stator, FKM O-Rings, and 0.375" FlangeISO-GARD® Flanged; Displacement, geometric, per revolution:29502-0123; Power:-22 to 400°F; Rate Of Pressure Change:0.24 lb; Control Fluid Drain:4500 fpm; Maximum Torque:4.0000 in; Load Pressure:0.020 in; Flow:0.7500 in; Maximum rotational speed:Ambient; |
| Yuken DSG-03 pressure valve | Pilot Pressure:3.1875 in; Drive Power:Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary; Voltage:Labyrinth; Control Fluid Drain:3926904590.US; Moment of inertia rotary group:ISO-GARD® Flanged Design, Filled PTFE Rotor and Stator, FKM O-Rings, and 0.375" FlangeISO-GARD® Flanged; Sequence Valve:29502-0123; Maximum Permissible Speed (limit Speed):-22 to 400°F; Determining Operating Characteristics:0.24 lb; Weight (approx.):4500 fpm; Control Pressure Measurement:4.0000 in; Power:0.020 in; Maximum Axial Force At Standstill:0.7500 in; Load Pressure:Ambient; |
| Yuken MPW-06 pressure valve | Maximum Permissible Pilot Pressure:3.1875 in; Maximum Permissible Speed (limit Speed):Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary; Power:Labyrinth; Torque:3926904590.US; Control Pressure Measurement:ISO-GARD® Flanged Design, Filled PTFE Rotor and Stator, FKM O-Rings, and 0.375" FlangeISO-GARD® Flanged; Maximum Volume Flow:29502-0123; Pressurefree Operation:-22 to 400°F; Sequence Valve:0.24 lb; Load Pressure:4500 fpm; Case volume:4.0000 in; Maximum rotational speed:0.020 in; Flow:0.7500 in; Pilot Pressure:Ambient; |
| Yuken MSW-04-*-10 pressure valve | Moment of inertia rotary group:3.1875 in; Flow:Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary; Drive Speed:Labyrinth; Pilot Pressure:3926904590.US; Maximum Permissible Speed (limit Speed):ISO-GARD® Flanged Design, Filled PTFE Rotor and Stator, FKM O-Rings, and 0.375" FlangeISO-GARD® Flanged; Weight (approx.):29502-0123; Determining Operating Characteristics:-22 to 400°F; Control Fluid Drain:0.24 lb; Maximum rotational speed:4500 fpm; Maximum angular acceleration:4.0000 in; Nominal Resistance:0.020 in; Maximum Volume Flow:0.7500 in; Maximum Axial Force At Standstill:Ambient; |
| Yuken DSG-01 pressure valve | Nominal Resistance:3.1875 in; Maximum Axial Force At Standstill:Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary; Moment of inertia rotary group:Labyrinth; Maximum Torque:3926904590.US; Power:ISO-GARD® Flanged Design, Filled PTFE Rotor and Stator, FKM O-Rings, and 0.375" FlangeISO-GARD® Flanged; Determining Operating Characteristics:29502-0123; Maximum angular acceleration:-22 to 400°F; Control Pressure Measurement:0.24 lb; Drive Speed:4500 fpm; Maximum Volume Flow:4.0000 in; Sequence Valve:0.020 in; Rate Of Pressure Change:0.7500 in; Control Fluid Drain:Ambient; |
| Yuken MPW-04-*-10 pressure valve | Pilot Pressure:3.1875 in; Drive Power:Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary; Power:Labyrinth; Maximum angular acceleration:3926904590.US; Control Pressure Measurement:ISO-GARD® Flanged Design, Filled PTFE Rotor and Stator, FKM O-Rings, and 0.375" FlangeISO-GARD® Flanged; Weight (approx.):29502-0123; Nominal Resistance:-22 to 400°F; Displacement, geometric, per revolution:0.24 lb; Maximum Axial Force At Standstill:4500 fpm; Torque:4.0000 in; Rotary stiffness:0.020 in; Maximum Permissible Pilot Pressure:0.7500 in; Voltage:Ambient; |
| Yuken DSHG-06 pressure valve | Control Fluid Drain:3.1875 in; Maximum Axial Force At Standstill:Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary; Determining Operating Characteristics:Labyrinth; Maximum Permissible Speed (limit Speed):3926904590.US; Load Pressure:ISO-GARD® Flanged Design, Filled PTFE Rotor and Stator, FKM O-Rings, and 0.375" FlangeISO-GARD® Flanged; Drive Power:29502-0123; Nominal Resistance:-22 to 400°F; Pressurefree Operation:0.24 lb; Rate Of Pressure Change:4500 fpm; Pilot Pressure:4.0000 in; Control Pressure Measurement:0.020 in; Rotary stiffness:0.7500 in; Case volume:Ambient; |
| Yuken MSW-06 pressure valve | Sequence Valve:3.1875 in; Maximum Torque:Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary; Nominal Resistance:Labyrinth; Control Pressure Measurement:3926904590.US; Flow:ISO-GARD® Flanged Design, Filled PTFE Rotor and Stator, FKM O-Rings, and 0.375" FlangeISO-GARD® Flanged; Determining Operating Characteristics:29502-0123; Power:-22 to 400°F; Displacement, geometric, per revolution:0.24 lb; Maximum rotational speed:4500 fpm; Case volume:4.0000 in; Maximum angular acceleration:0.020 in; Moment of inertia rotary group:0.7500 in; Weight (approx.):Ambient; |